V8s\V80 Dry & Wet
V80 Wheel Cleaning
With prolonged and continuous usage on marble floor, the friction in the wheels may be reduced and wheels become slippery. In this case, rub a sand paper very gently on both the wheels. It helps in cleaning the wheels and resuming wheels its normal ...
ILIFE V80/V8s Dust Tank Maintenance
HOW TO CLEAN DUST BOX OF V80 Open the bust box and clean the dust over there and open the (filters) in this filters you have to remove first, mesh, sponge and hepa filter, and clean it using brush, and after that put it back and run You have to ...
Water Tank Issue - E33
Water container Malfunction - E33 Problem: -V80 machine starts mopping but unable due to the cloth is not getting wet, and displays an E- 33 error on the screen. Reason: - Mainly the water tank is to keep the mopping cloth wet during cleaning but, ...
Side Brush not Rotating - E14
Problem: Recently purchased machine and one of the cleaning brush got stuck at one side. Machine throws error with red light and E14 displayed on LCD Screen.. Reason: Function of side brushes is to bring all the dust on both corners in center of the ...
Right or Left Wheel of the cleaner is Jammed - E12
Problem: The Vacuum Cleaner works fine for 5-10 minutes but after some time it gives beep and stops with an error on LCD Screen as E12. Reason: Sometimes a small/soft piece of paper or thread get tangled around the roller wheel, which stops it from ...
Bumper Stuck from One Side of Unit - E23
Problem:- Whenever V80 machine is switched on, it starts, goes few step and then come back and stop. Reason: In daily cleaning routine, sometimes a thread or some dust get stuck on bumper. Due to this 1 side of the bumper is pressed and does not ...
V8s Machine Starts, Moves few steps, comes back and Stops - E22
Problem: V80 machine initiate from docking station, starts & run few steps, then come back and stops. Reason: There are 11 sensors under each ILIFE vacuum cleaner that helps it to navigate to different direction or detects stairs to move back. During ...