V8s Error

Bumper Stuck from One Side of Unit - E23

Problem:- Whenever V80 machine is switched on, it starts, goes few step and then come back and stop. 

Reason: In daily cleaning routine, sometimes a thread or some dust get stuck on bumper. Due to this 1 side of the bumper is pressed and does not come out.

Solution: ● In order to fix this, first turn off  the Machine, from the side button       

● Try to press the bumper, which is the front part of Cleaner and see if it comes out. Bumper need to be pressed from both corners and center. 

● Once you find that bumper is pushing back fine,  Please start the machine and it should work fine. This is the part of daily cleaning activities.

    • Related Articles

    • Side Brush not Rotating - E14

      Problem: Recently purchased machine and one of the cleaning brush got stuck at one side. Machine throws error with red light and E14 displayed on LCD Screen.. Reason: Function of side brushes is to bring all the dust on both corners in center of the ...

    • V8s Machine Starts, Moves few steps, comes back and Stops - E22

      Problem: V80 machine initiate from docking station, starts & run few steps, then come back and stops. Reason: There are 11 sensors under each ILIFE vacuum cleaner that helps it to navigate to different direction or detects stairs to move back. During ...

    • Right or Left Wheel of the cleaner is Jammed - E12

      Problem: The Vacuum Cleaner works fine for 5-10 minutes but after some time it gives beep and stops with an error on LCD Screen as E12. Reason: Sometimes a small/soft piece of paper or thread get tangled around the roller wheel, which stops it from ...

    • Voice Message -' Please Check the Side brush' - Left or Right

      Problem: A9s machine stopped with an error as to check the left or right side brush.  Reason: The machine is intelligent enough to give a voice message if it gets stuck due to any reason. With human hair falling on ground generally it gets stuck on ...

    • Voice Message -' Please check the Main Brush' - Bristle/Silicon Brush

      Problem: A Voice message on A9s machine, saying to check the Bristle or Silicon brush. Reason: During general cleaning, a large thread or loose wires like speakers, iron, threads lies on the floor. While cleaning any of such wire rotates on the edge ...