V5s Pro works on i-dropping technology. However, continuous usage over long time and dirty floors may lead to blockade of ducts and water tank may stop dispensing water. In that case, water tank needs to be cleaned. Water tank can be cleaned in three simple steps:
1.Unscrewing and remove the base.
2.With the help of a pin, clean two tiny holes / ducts to remove the dirt.
3.Open the water injection cap to see if water is dripping and screw it.
Once it is done, V5s pro is again ready for mopping.
Water container Malfunction - E33 Problem: -V80 machine starts mopping but unable due to the cloth is not getting wet, and displays an E- 33 error on the screen. Reason: - Mainly the water tank is to keep the mopping cloth wet during cleaning but, ...
For wet cleaning, V7s plus uses i-dropping technology in which it sprinkles the floor. To ensure thorough wet cleaning, water tank must be inserted properly. There are four simple steps to insert water tank. There are four simple steps to insert ...
With prolonged and continuous usage on marble floor, the friction in the wheels may be reduced and wheels become slippery. In this case, rub a sand paper very gently on both the wheels. It helps in cleaning the wheels and resuming wheels its normal ...
HOW TO CLEAN DUST BOX OF V80 Open the bust box and clean the dust over there and open the (filters) in this filters you have to remove first, mesh, sponge and hepa filter, and clean it using brush, and after that put it back and run You have to ...
ILIFE A9s can be connected to smartphone app. With its real-time display, you can track the cleaning progress. The water supply can also be controlled via smartphone app, in three different levels. Before connecting to the smartphone, make sure that ...