Voice Message -' Please Check the Side brush' - Left or Right

Voice Message -' Please Check the Side brush' - Left or Right

Problem: A9s machine stopped with an error as to check the left or right side brush. 

Reason: The machine is intelligent enough to give a voice message if it gets stuck due to any reason. With human hair falling on ground generally it gets stuck on the side brush, as they rotate in circular motion to collect dust from the edges/corner. This is a part of general maintenance issue.

Solution:- Please follow the below steps:

  1. Please Turn off the Machine and put it upside down
  2. Snap out the side brushes, as shown in Video
  3. Unscrew the cover and remove hair
  4. Screw the cover and snap in side brush
  5. Start the machine and it will work. 
Play below video, for step by step instructions:

    • Related Articles

    • Voice Message -' Please check the Main Brush' - Bristle/Silicon Brush

      Problem: A Voice message on A9s machine, saying to check the Bristle or Silicon brush. Reason: During general cleaning, a large thread or loose wires like speakers, iron, threads lies on the floor. While cleaning any of such wire rotates on the edge ...
    • Voice Message -' Please Check the Wheel' - Right / Left

      Problem: A voice message comes, please check the right or left wheel. Reason: During daily cleaning, sometimes a tissue paper/napkin get stuck on Right or Left wheel of machine, due to which it get jammed. If you try to rotate with hand, it will not ...
    • Side Brush not Rotating - E14

      Problem: Recently purchased machine and one of the cleaning brush got stuck at one side. Machine throws error with red light and E14 displayed on LCD Screen.. Reason: Function of side brushes is to bring all the dust on both corners in center of the ...
    • Voice Message -'Please check the universal Nose Wheel - Voice Error'

      Problem: A Voice Message ' Please check the Universal Nose Wheel'. Reason: Nose wheel is the free 360° rotating wheel to maintain the balance and give right directions to robotic cleaners.  Solution:- Here are the steps: Please Turn off the Machine ...
    • Voice Message -' Please check the sensors' - Ground Sensors

      Problem: Machine moves few steps and then stops, considering there is an edge. Reason: While moving machine manual through hand from 1 location to other location, the underneath sensors get hand print or dirt. Robotic Cleaner, take that as dark area ...