How to Schedule ILIFE V55 to Clean from a Specific Time
How to Schedule ILIFE V55 to Clean from a Specific Time
One important feature of V55 is cleaning schedule,
which can be adjusted very quickly and easily. Once the schedule is set, V55
will start working automatically at specified time. To set the schedule, please
follow the instruction given below:
Turn ON the power switch and press PLAN button on the main body of robot to schedule cleaning at a specific time.
If the schedule time is set to 5:30, the robot will start cleaning after 5 hours and 30 minutes
To set the time, SPOT button and HOME button are used. SPOT button is used to decrease the number and HOME button is used to increase the button.
After setting the schedule, make sure to press CLEAN button to confirm it.
When you set the schedule, the final operation will be confirmed by beep from the robot. If there is no beep sound, operation is unsuccessful.
Once the schedule is set, the robot will work at this time everyday until the schedule is cleared.
If the power switch on the side of robot is turned OFF, the schedule will be cleared.
If we press and hold PLAN button for 5 seconds, schedule will be cancelled
Plan can also be cancelled by adjusting the time on display screen to 00:00.
NOTE:
When timer is scheduled on robot, please ensure that
the power switch is turned ON and it is not connected to adapter plug-in, it
should be on the docking station.
HOW TO CLEAN DUST BOX OF V80 Open the bust box and clean the dust over there and open the (filters) in this filters you have to remove first, mesh, sponge and hepa filter, and clean it using brush, and after that put it back and run You have to ...
For wet cleaning, V7s plus uses i-dropping technology in which it sprinkles the floor. To ensure thorough wet cleaning, water tank must be inserted properly. There are four simple steps to insert water tank. There are four simple steps to insert ...
ILIFE A9s can be connected to smartphone app. With its real-time display, you can track the cleaning progress. The water supply can also be controlled via smartphone app, in three different levels. Before connecting to the smartphone, make sure that ...
Problem: V80 machine initiate from docking station, starts & run few steps, then come back and stops. Reason: There are 11 sensors under each ILIFE vacuum cleaner that helps it to navigate to different direction or detects stairs to move back. During ...
Problem: The Vacuum Cleaner works fine for 5-10 minutes but after some time it gives beep and stops with an error on LCD Screen as E12. Reason: Sometimes a small/soft piece of paper or thread get tangled around the roller wheel, which stops it from ...